ENGINE HEATERS INSTALLATION, REPAIRS, SPARE PARTS

ENGINE HEATERS

The Far East of Russia is famous for its harsh climate. Exploitation of trucks and other machinery with engine heater is obviously one of main factors that allow transportation business to work with minimum down time in such conditions. 

Basic advantages of the truck with engine heater:

1. Engine start with weather temperature -45C
2. Increased service life because of warmed engine start
3. Ability to heat the cab with turned off engine

Our company performs professional Eberspacher and Webasto heaters installation.

Installation, service and repairs are accomplished by the trained specialist.
ENGINE HEATER SCHEME
Scheme and short description of basic principles of the heater operation and control are depicted below.
The heater is autonomous. It's connected to the cooling system of the truck. The fuel may be taken from the main fuel tank of the truck or from separate smaller tank intended only for heater (it's recommended to install such tank if the temperature is extremely low, separate fuel tank allows to prepare mix of the diesel fuel and kerosene, that works much better in very low temperature). The electric power is supplied from batteries of the truck. The coolant in the system is heated by burning fuel through the heat exchanger of the heater. The circulation of the coolant is provided by the pump mounted in the body of the heater causing engine to increase its temperature and also to provide heated coolant in the radiator of the cab. Heating process is controlled through the ECU of the heater that takes its data from different sensors (flame sensor, safety thermal cutout sensor, coolant temperature sensor, etc) and is absolutely save.

The control of the heater may be performed in different ways:

1. With basic switch from the cab
2. With special timer
3. With mobile phone through GSM module
4. With special remote control unit with radius around 1000 m
Heaters are supplied with mounting kits that include all necessary parts.
BASIC TECHNICAL DATA
For European trucks, regarding wide experience of trucks exploitation, it's recommended to install heaters with heating power around 10 kW such as Hydronic D10 or Webasto 90S or Pro 90. 

Such heaters are reliable in conditions of the Far East of Russia and can cope even with lowest temperatures in Sakha Republic (Yakutiya).

In the data sheet below you can see brief list of parameters of Hydronic heaters.